Find a TenderRequests to participate open Tender notice
Published 20 Nov 2026, 11:20 GMT

Official UK procurement notice

Supply of New and Refurbished Actuators

Authority: THAMES WATER UTILITIES LIMITED

Framework agreementTwo-stage2 lotsGoodsCompetitive flexible procedureAbove thresholdUtilitiesSME suitable
Framework ceiling (notional)£2,800,000total for 2 lots · framework ceiling, not attributable revenue
Submission deadline 8 Jan 202712:00 GMT · 48 days left
Clarification cut-off 18 Dec 202617:00 GMT · questions to the authority
Framework period 3 yrsends 31 Aug 2030 · up to 31 Aug 2035 with extensions · starts 1 Sept 2027
Notice summaryFrom the published notice

IMPORTANT: Please read this section before deciding whether you wish to register for this event. This section provides you with information regarding the scope of this procurement and details some of the key requirements that a successful applicant MUST be able to deliver. Suppliers will be required to demonstrate the technical capability, capacity and resources necessary to support Thames Water's actuator estate and to meet the applicable technical, quality, safety and performance requirements. Key requirements include the capability to manufacture and/or supply equipment in accordance with the applicable WIMES M149 requirements and to provide the required supply and/or service coverage across the Thames Water estate. Published lot titles: Supply of new actuators; Repair & Refurbishment.

What is being bought2 lots · detail below

Published requirement description

IMPORTANT: Please read this section before deciding whether you wish to register for this event. This section provides you with information regarding the scope of this procurement and details some of the key requirements that a successful applicant MUST be able to deliver.

Thames Water is seeking to establish a framework agreement for the supply, installation, repair and maintenance of actuators and associated equipment and spare parts across its operational estate.

The scope includes the supply and installation of new actuators and associated spare parts, together with the repair, refurbishment and maintenance of existing and post-warranty actuators. Suppliers will be required to demonstrate the technical capability, capacity and resources necessary to support Thames Water's actuator estate and to meet the applicable technical, quality, safety and performance requirements.

Key requirements include the capability to manufacture and/or supply equipment in accordance with the applicable WIMES M149 requirements and to provide the required supply and/or service coverage across the Thames Water estate. Further details of the scope, technical requirements, service requirements and evaluation criteria will be provided within the procurement documents.

The procurement will be divided into lots as described in this Tender Notice and associated procurement documents. Suppliers should consider the requirements of each lot when determining whether to participate.

Thames Water reserves the right to refine the award criteria in accordance with the Procurement Act 2023 and the procurement documents.

Key requirements for a supplier to meet to be considered for this opportunity:

  • Capability to manufacture and/or supply to M149 WIMES standard
  • Capability to provide the required supply and/or service coverage across the Thames Water estate

Thames Water reserves the right to refine the award criteria. Please note that that deadline for asking for access to the PSQ & submitting of the PSQ is 8 January 2027 at 12 noon.

  • How the procedure runs: Thames Water is seeking to establish a supplier framework agreement for Supply and Maintenance of actuators. The procurement process has been designed as a multi-stage procedure to enable Thames Water to evaluate technical and commercial proposals and engage with bidders. Bidders will submit a Pre-Selection Questionnaire (PSQ) via SAP Ariba to assess suitability, capability, and capacity. Bidders who successfully pass the selection stage will be invited to participate in the Invitation to Negotiate (ITN) stage. Bidders will be required to submit initial tenders setting out their proposed technical and commercial solutions. Following initial tenders, Thames Water may conduct clarifications, negotiations, and presentations to support understanding and refinement of proposals. Tenders will be evaluated in accordance with the award criteria set out in the procurement documents. Thames Water will evaluate final tenders and award a framework to the supplier(s) submitting the Most Advantageous Tenders based on the published award criteria. All procurement documents, communications, and submissions will be managed via SAP Ariba. Suppliers must register on the system and submit all responses through this platform. Further details of the procurement process, including evaluation methodology, scoring, and detailed requirements, will be provided in the procurement documents issued at each stage. IMPORTANT: Please read this section before deciding whether you wish to register for this event. This section provides you with information regarding the scope of this procurement and details some of the key requirements that a successful applicant MUST be able to deliver. Thames Water intends to establish a dual-lot, supplier framework agreement(s) for the provision and maintenance of actuators across Thames Water operational assets. The scope of the framework includes supply, repair, replacement of actuators as well as the supply of spare parts. The objective is to identify and deliver opportunities to reduce whole-life costs, improve efficiency, and optimise performance across operational sites. The contract will include: - Fixed pricing structures with agreed review mechanisms. - Key performance indicators (KPIs) and performance monitoring requirements to ensure delivery against expected outcomes. - Requirements to support collaborative working and a transition from transactional delivery to strategic partnership. Suppliers will be expected to support a culture of continuous improvement and contribute to ongoing enhancement of processes and delivery approaches throughout the contract lifecycle. Delivery Model The anticipated delivery model will follow a structured approach comprising: Condition reports for all actuators replaced or repaired Service history by site for all works carried on actuators Ensure all works carried out to M149 WIMES standard Hold sufficient stock of actuators and associated spare parts The contract is expected to provide maintenance across the Thames estate containing in excess of 14,000 actuators. Further detail on the scope, service requirements, and call-off mechanisms will be provided within the procurement and contract documents. The following conditions would be considered as some of key requirements for a supplier to meet to be considered for this opportunity: • Must be able to cover the Thames Valley, London and Home Counties geographical area • Must have a proven track record in delivering measurable savings and innovation within the scope of this framework. Thames Water reserves the right to refine the award criteria. Please note that that deadline for asking for access to the PSQ & submitting of the PSQ is 30 November 2026, at 12:00pm.

CPV: Actuators · Electric valve actuators · Valve actuators

More open work like this

Other notices open now · live search, filters set

How this framework works

From the published notice
Type
Closed framework
Call-offs
every call-off is a further competition among the appointed suppliers
Framework period
3 yrs · up to 8 yrs from 1 Sept 2027
Published description of the framework

The framework will be established as a dual-lot, supplier framework agreement(s). Call-off contracts will be awarded directly to the appointed supplier, with competition taking place at the framework award stage.

Thames Water intends to establish a collaborative and strategic working relationship with the appointed supplier(s), with a focus on delivering continuous improvement, innovation, and long-term value across the contract lifecycle.

Pricing for the framework will be based on an agreed schedule of rates (rate card) and agreed pricing for actuators and associated spare parts, which will form the basis for pricing all call-off contracts. The detailed structure and coverage of the rate card will be defined and agreed as part of the procurement process.

Prices will be fixed for the initial three (3) year term of the framework agreement. Following this period, prices may be subject to adjustment in line with the Consumer Prices Index including owner occupiers' housing costs (CPIH). Any such adjustments will be subject to agreement between Thames Water and the Supplier and applied in accordance with the terms set out in the contract.

The scope, programme, and pricing of individual call-off contracts will be agreed between Thames Water and the Supplier at the point of award, in line with the agreed rate card and contractual terms.

The framework will include appropriate performance management and commercial governance arrangements, including the use of key performance indicators (KPIs) and regular review mechanisms, to ensure delivery of value for money and support a collaborative, high-performing supplier relationship.

Further detail on the pricing structure, indexation mechanism, and call-off process will be provided in the procurement and contract documents.

Lots and requirements (2)Procurement structure

2 lots · all with a published value · same evaluation weights on every lot
Lot #1Supply of new actuatorsRenewal 3 yrsSMEPublished value£1,700,000

Supply & installation of new actuators, including spare parts

Contract period: 1 Sept 2027 – 31 Aug 2030 (3 yrs) · up to 31 Aug 2035 with extensionsValue: £1,700,000 exc. VAT · £2,100,000 inc. VAT
Delivery: London, South EastEligibility: SME eligible
Extensions: The full scope of the services to be provided and any options that may be considered throughout the term of the agreement, is set out in the Specification issued within the Invitation to Negotiate (ITN) document · Thames Water envisages that the contract will be awarded for an initial term of 3 years with options to extend by 1 year or longer, up to a maximum overall term of 8 years.

Who is likely to bid for this lot ↓

Lot #2Repair & RefurbishmentRenewal 3 yrsSMEPublished value£750,000

Repair & maintenance of new (post warranty) & existing actuators, including spare parts.

Contract period: 1 Sept 2027 – 31 Aug 2030 (3 yrs) · up to 31 Aug 2035 with extensionsValue: £750,000 exc. VAT · £900,000 inc. VAT
Delivery: London, South EastEligibility: SME eligible
Extensions: The full scope of the services to be provided and any options that may be considered throughout the term of the agreement, is set out in the Specification issued within the Invitation to Negotiate (ITN) document · Thames Water envisages that the contract will be awarded for an initial term of 3 years with options to extend by 1 year or longer, up to a maximum overall term of 8 years.

Who is likely to bid for this lot ↓

What it takes to win
i

Evaluation split and conditions of participation as published; the tender pack may add more
How bids are scored · same split on all 2 lots
Quality: 60%Price: 40%
Published sub-criteria (2)
  • Technical: 60%
  • Commercial: 40%
Published award criteria (2)
  • Technical
  • Commercial
Lot distribution rule: Where a supplier can supply new actuators as well as repair & refurbish actuators
What this means for your bid
  • Price carries 40 of 100 points: a 10% discount moves about 4 points. The method statement decides this lot, not the discount.
  • “Supply of New and Refurbished Actuators” is a framework: the contest is a place on its panel, not a single contract: each call-off is a further competition, so the pricing contest starts after appointment.

Price arithmetic assumes straight proportional scoring; the tender pack may use another formula.

Competition analysis · published record, not a forecast of who will bid

How THAMES WATER UTILITIES LIMITED buys Taps, cocks, valves and similar appliances (CPV 4213), and who usually turns up

THAMES WATER UTILITIES LIMITED’s published record next to the market for the same work. Compared with other frameworks and DPS only. Whole-market view: Taps, cocks, valves and similar appliances (CPV 4213) →

1

How the contest usually goes

Winner shares use published awards; bid and price charts use contested lots.

Question for the bid
This buyerTHAMES WATER UTILITIES LIMITED · all categories
What to do with it
How often do SMEs win?
i

The counts under this question show how many awards have a known supplier size.

Buyer: 23 of 47 known-size awards · market: division 42 · UK-wide, n=96
49%50%

Small firms have won here. Neither number says whether you qualify; it describes who has been winning.

How often do local suppliers win?
i

Local means the winner is registered in the region where that award was delivered.

Buyer: 24 of 54 known-location awards · market: division 42 · UK-wide, n=74
44%50%

Most of this buyer’s recorded winners were registered outside the region where that award was delivered.

How long to a decision?
i
Buyer: 10 decided notices · market: division 42 · UK-wide, n=24
198 days70 days

Half of these awards have an award date within 198 days of the bid deadline.

How often single-bid or direct?
i

Both shares are minimums: some awards have no bid count.

Buyer: at least 0 of 13 procurements with awards had no recorded rival · market: division 42 · UK-wide, n=48
0%40%

Missing bid counts may hide more single-bid awards. This share is a minimum.

How many bids did past lots attract?

i
This buyerNo bid counts published
The market165 lots with bid counts · division 42 · UK-wide
6% had one bid
% of the market's 165 lots with a published bid count · select a colour for counts
1 bid6%
Market: 10 of 165 lots with published bid counts.
2–323%
Market: 38 of 165 lots with published bid counts.
4–622%
Market: 36 of 165 lots with published bid counts.
7+49%
Market: 81 of 165 lots with published bid counts.

How did awards compare with estimates?

i

On a framework or DPS, prices are agreed when work is called off.

Not comparable on a framework or DPS: the price is set later, on each call-off.

2

Assess each lot
i

Open a lot for its forecast, this buyer’s previous supplier and possible competitors, from published award history, not a bid list

Lot #1Supply of new actuatorsCPV 421336 monthsSME suitablePublished estimate£1.7m
Expected competition
i

Each lot shows its own forecast based on its own category; forecasts for different lots of the same notice are not comparative. The bar shows 165 past lots.

—No model forecast yet6% chance of a single bid
Past bids on 165 similar lots
1 bid6%
10 of 165 similar past lots received 1 bid (6%).
2–323%
38 of 165 similar past lots received 2–3 (23%).
4–622%
36 of 165 similar past lots received 4–6 (22%).
7+49%
81 of 165 similar past lots received 7+ (49%).
Comparable past lots usually drew 6 bids.
Commercial price forecast
i

No comparable awards for this lot yet.

—Priced at call-off
On a framework or DPS the price is agreed on each call-off, so there is no award price to forecast here: the published figure is a ceiling.

Who has supplied this buyer on similar work?
i

No earlier contract of this buyer matches this lot on the published record.

Who could compete for this lot?
i

Restricted route (Stage 2 ITT / Shortlist): Bidding is restricted to invited candidates who qualified at Stage 1. Uninvited suppliers cannot participate in this round.

Candidate suppliers for this notice have not been worked out yet, so this is not a verdict that nobody fits.

Lot #2Repair & RefurbishmentCPV 421336 monthsSME suitablePublished estimate£750k
Expected competition
i

Each lot shows its own forecast based on its own category; forecasts for different lots of the same notice are not comparative. The bar shows 165 past lots.

—No model forecast yet6% chance of a single bid
Past bids on 165 similar lots
1 bid6%
10 of 165 similar past lots received 1 bid (6%).
2–323%
38 of 165 similar past lots received 2–3 (23%).
4–622%
36 of 165 similar past lots received 4–6 (22%).
7+49%
81 of 165 similar past lots received 7+ (49%).
Comparable past lots usually drew 6 bids.
Commercial price forecast
i

No comparable awards for this lot yet.

—Priced at call-off
On a framework or DPS the price is agreed on each call-off, so there is no award price to forecast here: the published figure is a ceiling.

Who has supplied this buyer on similar work?
i

No earlier contract of this buyer matches this lot on the published record.

Who could compete for this lot?
i

Restricted route (Stage 2 ITT / Shortlist): Bidding is restricted to invited candidates who qualified at Stage 1. Uninvited suppliers cannot participate in this round.

Candidate suppliers for this notice have not been worked out yet, so this is not a verdict that nobody fits.

About this data
  • Estimates, labelled. The price range, possible competitors and earlier-work matches are our estimates from past awards, not published facts, win chances or price advice. The buyer’s own record and the wider market are shown apart, never mixed.
  • Source. Official UK public procurement notices (Find a Tender and Contracts Finder), reused under the Open Government Licence v3.0, updated through the day and rebuilt nightly. Not every figure uses both feeds, and each one shows how many records it rests on: see the methodology. Spotted something wrong? Tell us.

Procedure terms & legal framework

From the official record
Procedure method
Competitive flexible procedure
Legal basis
UKPGA · 2023/54 Procurement Act 2023
Procurement category
Goods
Notice status
Requests to participate open
Procurement threshold
Above threshold (FTS publication)
Regulatory regime
Utilities
Commercial structure
Framework agreement
Who may use this agreement
Not stated in the notice; call-off rights may be limited to the establishing authority
Competition type
Competitive procedure
GPA / WTO covered
Unspecified in notice
Recurring procurement
Unspecified in notice
First published
20 Nov 2026, 11:20 GMT
Last source update
20 Nov 2026, 11:20 GMT
Award evaluation window
Submission end – 1 Jul 2027
Authority reference
FA2523
FTS notice number
2026/S 000-110071
Latest notice
Tender notice (UK4)
Classification (CPV)
ActuatorsElectric valve actuatorsValve actuators
Delivery area
London (UKI)South East (UKJ)
Official registry OCID
ocds-h6vhtk-07c031 Find a Tender
How it runs

Thames Water is seeking to establish a supplier framework agreement for Supply and Maintenance of actuators. The procurement process has been designed as a multi-stage procedure to enable Thames Water to evaluate technical and commercial proposals and engage with bidders.

Bidders will submit a Pre-Selection Questionnaire (PSQ) via SAP Ariba to assess suitability, capability, and capacity.

Bidders who successfully pass the selection stage will be invited to participate in the Invitation to Negotiate (ITN) stage. Bidders will be required to submit initial tenders setting out their proposed technical and commercial solutions.

Following initial tenders, Thames Water may conduct clarifications, negotiations, and presentations to support understanding and refinement of proposals.

Tenders will be evaluated in accordance with the award criteria set out in the procurement documents.

Thames Water will evaluate final tenders and award a framework to the supplier(s) submitting the Most Advantageous Tenders based on the published award criteria.

All procurement documents, communications, and submissions will be managed via SAP Ariba. Suppliers must register on the system and submit all responses through this platform.

Further details of the procurement process, including evaluation methodology, scoring, and detailed requirements, will be provided in the procurement documents issued at each stage.

IMPORTANT: Please read this section before deciding whether you wish to register for this event. This section provides you with information regarding the scope of this procurement and details some of the key requirements that a successful applicant MUST be able to deliver.

Thames Water intends to establish a dual-lot, supplier framework agreement(s) for the provision and maintenance of actuators across Thames Water operational assets.

The scope of the framework includes supply, repair, replacement of actuators as well as the supply of spare parts. The objective is to identify and deliver opportunities to reduce whole-life costs, improve efficiency, and optimise performance across operational sites.

The contract will include:

  • Fixed pricing structures with agreed review mechanisms.
  • Key performance indicators (KPIs) and performance monitoring requirements to ensure delivery against expected outcomes.
  • Requirements to support collaborative working and a transition from transactional delivery to strategic partnership.

Suppliers will be expected to support a culture of continuous improvement and contribute to ongoing enhancement of processes and delivery approaches throughout the contract lifecycle.

Delivery Model

The anticipated delivery model will follow a structured approach comprising:

Condition reports for all actuators replaced or repaired

Service history by site for all works carried on actuators

Ensure all works carried out to M149 WIMES standard

Hold sufficient stock of actuators and associated spare parts

The contract is expected to provide maintenance across the Thames estate containing in excess of 14,000 actuators.

Further detail on the scope, service requirements, and call-off mechanisms will be provided within the procurement and contract documents.

The following conditions would be considered as some of key requirements for a supplier to meet to be considered for this opportunity:

  • Must be able to cover the Thames Valley, London and Home Counties geographical area
  • Must have a proven track record in delivering measurable

savings and innovation within the scope of this framework.

Thames Water reserves the right to refine the award criteria. Please note that that deadline for asking for access to the PSQ & submitting of the PSQ is 30 November 2026, at 12:00pm.

How to participate & submission route

Official notice Submit via portal
Submission portal named on this notice: portal not identified
Electronic submission allowedLanguage: EN
Requests to participate (first stage)
8 Jan 2027, 12:00 GMT
Appointment period ends
8 Jan 2027, 12:00 GMT
Clarification deadline
18 Dec 2026, 17:00 GMT
Submission channel
Official e-sourcing portal
Electronic submission
Allowed
Accepted languages
en
Detailed submission instructions & authority contactsFrom official release

If you would like to gain access to the PSQ documents please fill out the details form this link.

forms.cloud.microsoft/e/3dtKCbvkH4 ↗

Timeline

20 Nov 2026 → 1 Sept 2027 · 5 dates
  1. Tender notice published1h ago
    20 Nov 2026, 11:20 GMT
  2. Today
    20 Nov 2026
  3. Clarification questions byin 28 days
    18 Dec 2026, 17:00 GMT
  4. Admission / appointment period endsin 48 days · period end, not a bid countdown
    8 Jan 2027, 12:00 GMT
  5. Award decision expected byin 223 days
    1 Jul 2027, 23:59 BST
  6. Contract startsin 284 days
    1 Sept 2027, 00:00 BST

Notice history

1 event · 1 release on Find a Tender
  1. Tender notice published
    20 Nov 2026, 11:20 GMT
    UK4

Commercial outcome & contract awards

Nothing awarded yet
Awards (0)
No award published
Contracts (0)
No contract published
Bid statistics
No aggregate bid statistics published

Contracting authority & participating public bodies

THAMES WATER UTILITIES LIMITED

Contracting authorityPrivate utility GB-COH: 02366661 · GB-PPON: PNQQ-4647-DTCV Clearwater Court, Reading, South East, RG1 8DBContact email

Official documents & specifications (1)

Official links; attachments are not copied

Notices published for this procedure

  • Tender notice tenderTender noticeUK4Tender notice on Find a Tender