Find a Tender
Open for tender
Official procurement procedure
Industry 4.0 Teaching and Learning Technologies
Automation system
Industrial machinery
Published value
£400,000
Submission deadline 17 May 2021, 12:00 BST
Lots published1
Procurement Executive Summary
AI & Search Synopsis
Generated from official OCDS record
Tenderline Synopsis: University of Wales Trinity Saint David: "Industry 4.0 Teaching and Learning Technologies". Published status: active. Published value: £400,000. 1 published lot. Recorded submission deadline: 17 May 2021, 12:00 BST. See the official notice for participation instructions.
| Contracting Authority | University of Wales Trinity Saint David | Scope & Categories | Not published | Submission Window | Closed 17 May 2021, 12:00 BST |
|---|---|---|---|---|---|
| Submission Gateway | Direct notice route | Legal Basis & Regime | Standard procurement | Estimated Value (exc. VAT) | £400,000 |
Bidder Intelligence · Authority Profile: University of Wales Trinity Saint David
Market Analytics
Derived from OCDS awards & bid statistics
Published history for University of Wales Trinity Saint David. These figures describe retained records, not a forecast of bids or a measure of buyer bias.
Average Price Reduction
Not availableInsufficient comparable data
Competition Density
4.5Bids / Report
Supplier ConcentrationNo estimate
Insufficient attributable awardsNo concentration estimate availablePayment Terms
Check noticePublished terms
Coverage: 2 active published awards; 2 bid reports (which may be per lot). Supplier values exclude multi-supplier awards, frameworks and DPS, and use GBP only. They are published award values, not payments. Price reduction compares single-lot, single-award, single-supplier GBP procedures with explicitly non-framework/non-DPS status; increases remain in the average. Unpublished data stays unknown. Awarded suppliers are winners, not all bidders.
Procedure terms
Contracting AuthorityUniversity of Wales Trinity Saint David | Procedure methodNot published | Procurement categoryNot published |
Statusactive | Framework / DPSNot published | CompetitionNot published |
Above thresholdNot published | Legal basisNot published | Tender period startsNot published |
Clarification deadlineNot published | Electronic submissionNot published | Submission languagesNot published |
Published16 Apr 2021, 16:54 BST | Last source update16 Apr 2021, 16:54 BST | Recurring procurementNo |
ClassificationAutomation system, Industrial machinery | ||
Delivery area | ||
OCIDocds-h6vhtk-02a71a | ||
What is being bought
The primary scope of this tender is to design, supply, install and commission hardware for a flexible manufacturing system that can act as a physical demonstration learning system for relevant and latest industry 4.0 technologies. The system will need to be sited in the Automation and Robotics Labatory at the UWTSD Campus in Swansea Waterfront Campus IQ Building Island Rd, Swansea SA1 8EW.
The proposed systems need to be able to facilitate digital twin modelling with the current UWTSD Siemens Tecnomatix software and any further requirements for this should be identified.
This tender opportunity should consider an integrated physical hardware system with options such as, but not limited to;
a. Range of manufacturing Process Operations.
b. Assembly Operations (both manual and automated.)
c. Potential for integration with existing UWTSD Robotics (UR3s and UR10s for example.)
d. Opportunities for Measurement Systems Analysis teaching and learning.
e. Vision and Quality Inspection including product pass / fail identification.
f. Automated Warehousing and Storage using RFID technology.
g. Integrated automated guided vehicles with an open programming environment such as C++, Matlab and MS Robotics Developer Studio.
h. Energy usage analysis.
i. Cyber Security Vulnerabilities and Protection
What changed
From the official release history
- Published value updated to £400,000
16 Apr 2021, 16:54 BST - Status changed to active
16 Apr 2021, 16:54 BST - Official notice release published
16 Apr 2021, 16:54 BST - Submission deadline changed to 17 May 2021, 12:00 BST
16 Apr 2021, 16:54 BST - Buyer information updated
16 Apr 2021, 16:54 BST
Lots and requirements (1)
Published by the contracting authority
- Lot 1 · #1Individual lot title not publishedactivePublished valueNot publishedThe primary scope of this tender is to design, supply, install and commission hardware for a flexible manufacturing system that can act as a physical demonstration learning system for relevant and latest industry 4.0 technologies. The system will need to be sited in the Automation and Robotics Labatory at the UWTSD Campus in Swansea Waterfront Campus IQ Building Island Rd, Swansea SA1 8EW. The proposed systems need to be able to facilitate digital twin modelling with the current UWTSD Siemens Tecnomatix software and any further requirements for this should be identified. This tender opportunity should consider an integrated physical hardware system with options such as, but not limited to; a. Range of manufacturing Process Operations. b. Assembly Operations (both manual and automated.) c. Potential for integration with existing UWTSD Robotics (UR3s and UR10s for example.) d. Opportunities for Measurement Systems Analysis teaching and learning. e. Vision and Quality Inspection including product pass / fail identification. f. Automated Warehousing and Storage using RFID technology. g. Integrated automated guided vehicles with an open programming environment such as C++, Matlab and MS Robotics Developer Studio. h. Energy usage analysis. i. Cyber Security Vulnerabilities and ProtectionContract periodNot publishedEligibilityNot publishedOptions / renewalNot published
Timeline
- Procedure published
16 Apr 2021, 16:54 BST - Submission deadline
17 May 2021, 12:00 BST
Commercial outcome and competition
AwardsNo award published |
ContractsNo contract published |
Bid statisticsNo aggregate bid statistics published |
Buyer and organisations in this procedure
University of Wales Trinity Saint David
Contracting authority GB-FTS-6641Documents (1)
Official links; attachments are not copied
Related procedures (0)
No related procedures published