Official UK procurement notice
Multi-Disciplinary Design Services · UK public procurement notice
Authority: The Corporate Officer of the House of Lords and The Corporate Officer of the House of Commons
What is being bought5 lots · detail below
Published requirement descriptionThe Corporate Officer of the House of Lords and the Corporate Officer of the House of Commons (acting jointly) intend to establish a bicameral parliamentary framework agreement through which they can secure the services of suitably qualified and experienced multidisciplinary design service providers via call-off contracts, acting jointly or individually.
The Delivery Authority shall also be entitled to issue call-off contracts under the framework agreement.
To increase access to specialists, the services will be procured through five lots: (i) Mechanical and Electrical Plant (MEP) engineering services; (ii) civil and structural engineering design services; (iii) conservation, architecture and heritage services (iv) control systems and electronic system engineering services; and (v) fire engineering services.
The core services that are required include, but are not limited to: Lead Designer; Architectural Services; Mechanical and Public Health Engineering; Electrical Engineering; Control Systems and Electronics Engineering; Structural and Civil Engineering; Structural and Civil Engineering; Fire Engineering and NEC4 Supervisor.
Supplementary specialist services will also be required to achieve a fully integrated design service / solution for the wide and diverse nature of projects and programmes that will be undertaken.
These specialist services may include but not limited to
- Archaeological Surveys
- Archaeological Watching Briefs
- Asbestos Consultancy Services
- Audio Visual (AV) Services
- BREEAM Consultancy Services
- WELL Building Consultancy Services
- Catering Design and Specification Services
- Ecology Services
- Landscape Architect Services
- Religious Services
- Security (Building Fabric)
- SKA Assessment
- Topographical Surveys
- Traffic and Transport Impact Assessments
- Unexploded Ordnance (UXO) Services
- Workspace Planning Services
- Third Party Assurance for Specialist Services (such as CFD validation (Fire) and fire suppression design and installation assurance)
- Drone surveys
- Town Planning Consultant inclusive of: Planning consultancy (including statutory planning applications)
- Health and Safety Consultant inclusive of:
o Disability equality duties under the Equality Act 2010
o Health & Safety Advisor
o Supervisor role
- Acoustic Engineer inclusive of:
o Acoustic engineering
- Noise surveys, studies and assessments
- Other Specialist Services: Any other specialist consultancy services or specialist surveys which may be required.
It is envisaged that for individual call-off contracts awarded under the framework agreement, a Lead Designer will be appointed (from the most appropriate lot) at Gate 0 - 1 (RIBA Plan of Work 2020). On appointment, the Lead Designer will take sole responsibility for delivery of design scope whether design services are subcontracted or not.
It is further envisaged that the Lead Designer will endeavour to use other framework suppliers save in circumstances that capacity or capability is not available to support the efficient and effective delivery for a diverse range of projects that sit within the medium-term investment plan of the estate. Whilst this is how the Authority envisages the framework will operate, it reserves its right to alter this approach for projects throughout the life of the framework agreement.
Additional detail on the proposed operation of the framework agreement is contained within the procurement documentation.
CPV: Advisory and consultative engineering services · Advisory architectural services · Ancillary building services · Approval plans, working drawings and specifications · Archaeological services · Architectural design services · Architectural services for building extensions · Architectural services for buildings · Architectural services for outdoor areas · Architectural, construction, engineering and inspection services · Architectural, engineering and surveying services · Asbestos removal services · +61 more
Lots and requirements (5)Procurement structure
5 lots · all with a published valueEvery one of these 3 lots carries the same published figure, £6,000,000: it is the framework's maximum for the whole notice, not each lot's own budget, and no share per lot is published. The cards below say ceiling above rather than repeat it.
Lot #1Mechanical & Electrical Plant (MEP) Engineering ServicesPublished value£12,000,000
The contracting authority requires suitably qualified and experienced Mechanical and Electrical Plant (MEP) engineering services suppliers to undertake scope that includes but may not be limited to:
- provision of comprehensive and fully coordinated electrical engineering design services covering core High Voltage (HV) & Low Voltage (LV) systems
- provision of comprehensive and fully coordinated specialist designs for Vertical Transportation (VT)
- provision of comprehensive and fully coordinated specialist designs for Electrical Resilience. In producing designs for resilience, conduct thorough investigations and all required steps for risk mitigation, Hazard and Operability Study (HAZOPS) and stress testing within the Parliamentary standard to obtain acceptance of design
- regular engagement with Contracting Authority and other client technical stakeholders, and participation in Contracting Authority Reviews. process through all RIBA stages, providing design deliverables in accordance with BSRIA BG6 - A Design Framework for Building Services.
- provision of feasibility reports to RIBA 2 with a recommendation for the Contracting Authority
- provision of Lead Design, design management and integration where required by the contracting authority
- provision of client monitoring support during site phases up to RIBA 7, or upon Handover to the Main Contractor
- capability to model building services engineering to Building Information Modelling (BIM) Level 2 in REVIT Software and assist the main contractor in coordinating this design which may include CDP elements.
- production and review of design calculations/schedules, risk assessments, and all necessary design supporting information relevant to the stage of design, as proof of concept for design
- conduct internal QA reviews, providing QA sign off designs, and sign off sheets in accordance with BSRIA BG6 pro formats at every RIBA design stage.
Lot #2Civil & Structural Engineering serviceceiling above
The contracting authority requires suitably qualified and experienced civil and structural engineering services suppliers to undertake scope that includes but may not be limited to:
- Structural Tests and Analysis for existing buildings and new projects
- Structural and civil engineering design solutions in historic environments and new construction projects
- Provision of Lead Design, design management and integration where required by the contracting authority
- Conservation and heritage structural repairs
- Temporary structure design
- Structural calculations
- Structural Engineering solutions that meet the IHSE BIM Vision.
Lot #3Conservation, architecture and Heritage ServicesPublished value£30,000,000
The contracting authority requires suitably qualified and experienced conservation, architecture and heritage services suppliers to undertake scope that includes but may not be limited to:
- Inspections, reporting and managing recommendations for repairs of the Listed built assets where required
- Provision of Lead Design, design management and integration where required by the contracting authority
- Project delivery and advice on scheduled refurbishments, projects and works involving Listed built assets
- Design proposals that meet both the functional requirements of the brief, conservation standards applicable to the Parliamentary Estate and statutory approvals
- Town planning including LBC (Local Borough Council) applications for listed buildings and heritage settings
- Technical design solutions that can be delivered within the constraints of an operational estate with historic buildings, existing infrastructure, and established business as usual requirements
- Design solutions that meet the IHSE BIM Vision, Sustainability standards and targets
Lot #4Control Systems and Electronic System Engineering Servicesceiling above
The contracting authority requires suitably qualified and experienced control systems and electronic system engineering services suppliers to undertake scope that includes but may not be limited to:
- specialist design services for control systems, Building Management Systems (BMS), Supervisory Control and Data Acquisition (SCADA), etc.
- development of functional design and user requirement- documents
- production of schematic, loop, wiring drawings where required
- Continuous Integration (C&I) System Design - circuit diagrams, panel general arrangements, detail schedules
- Data & Voice System Design and specification
- Programmable Logic Controller and Supervisory Control and Data Acquisition (PLC & SCADA) Systems Software Design
- Industrial Safety Systems
- Site Services Interface Design
- Provision of Lead Design, design management and integration where required by the contracting authority
- security systems design
- Continuous Integration (C&I) testing and commissioning
- Carry out feasibility / option studies as required.
Lot #5Fire Engineering Servicesceiling above
The contracting authority requires suitably qualified and experienced fire engineering and fire safety engineering services suppliers to undertake scope that includes but may not be limited to:
- Design proposals that meet the functional requirements of the brief, fire safety and fire engineering standards applicable to the Parliamentary Estate and statutory approvals
- Fire Safety Engineering design solutions in historic environments and new construction projects (including fire strategies)
- Fire Tests and Analysis of existing building elements
- Fire Risk Assessments to inform fire engineering design and fire safety engineering strategies
- Temporary structure fire safety design and construction phase fire strategies and fire risk assessment
- Production of schematic drawings detailing fire safety systems (active and passive)
- Fire Detection & Voice alarm System Design and specification
- Fire Suppression System Design and specification (including third party assurance where specialist systems, such as misting, is proposed)
- Technical design solutions that can be delivered within the constraints of an operational estate with historic buildings, existing infrastructure, and established business as usual requirements
- Fire safety engineering calculations and computational modelling
- Site Surveys
- Provision of Lead Design, design management and integration where required by the contracting authority
- Carry out feasibility/ option studies as required.
- Commissioning and handover assurance in accordance with Parliamentary fire safety Standards
What it takes to wini
How this buyer will score bids.
The evaluation criteria and weights exactly as published on the notice, grouped by family (price, quality, social value and so on).
Evaluation split and conditions of participation as published; the tender pack may add morei
How this buyer will score bids.
The evaluation criteria and weights exactly as published on the notice, grouped by family (price, quality, social value and so on).
- “Multi-Disciplinary Design Services” is a framework: the contest is a place on its panel, not a single contract.
Procedure terms & legal framework
From the official record · publisher note attached- Procedure method
- Restricted procedure
- Legal basis
- CELEX · 32014L0024 Public Contracts Regulations 2015 (Directive 2014/24/EU)
- Procurement category
- Services
- Notice status
- Closed
- Procurement threshold
- Unspecified in notice
- Regulatory regime
- Standard
- Commercial structure
- Framework agreement
- Who may use this agreement
- Not stated in the notice; call-off rights may be limited to the establishing authority
- Competition type
- Competitive procedure
- GPA / WTO covered
- Yes (GPA)
- Recurring procurement
- No (one-off requirement)
- First published
- 11 Feb 2022, 15:36 GMT
- Last source update
- 3 Aug 2022, 10:27 BST
- Authority reference
FWK1146- FTS notice number
2022/S 000-021216- Classification (CPV)
- Delivery area
- Official registry OCID
ocds-h6vhtk-03165dFind a Tender
Publisher note: The SQ and ITT documentation will be accessible at the Houses of Parliament's e-procurement portal: http://in-tendhost.co.uk/parliamentuk. SQ and tender submissions must be uploaded to the e-procurement portal; electronic responses submitted via e-mail are not acceptable. To access these documents, select the tender reference FWK1146 in the 'current tenders' list, click on the 'view tender details and express interest by clicking on the button provided. You will need to register your company details, thereafter you will be issued with a username and password. If you have previously registered with In-Tend, please follow the link shown which will redirect you to the home page where you can log on using your existing username and password to collect the tender documents. If you have registered and forgotten your username and password, click on the 'forgotten password' link on the In-Tend homepage. Please keep this username and password secure and do not pass it to any third parties. If you are experiencing problems, please contact the PPCS Business Support team via email: [email protected] or call +44 (0)207 219 1600 for further assistance. You are advised to allow sufficient time when responding to the SQ and ITT. Late SQs and tenders will not be accepted. If you are uploading multiple documents, you will have to individually load one document at a time or you can opt to zip all the documents in an application such as WinZip or WinRAR. Potential suppliers should note that the contracting authority is currently finalising its strategy to re-procure and / or secure services of "Project Management and Cost Management" (PMCM) services framework agreement (expired framework ref. FWK1093). If the contracting authority proceeds with re-procurement of this expired PMCM framework agreement, potential suppliers should note that the contracting authority will be unable to accept a position for call-off contracts under either this framework agreement (FWK1146) or the future PMCM framework agreement where a supplier manages services provided by their own organisation or affiliates or certifies payment for the same.
How it was run
Official noticeTender documents are also served through a separate tool: https://in-tendhost.co.uk/parliamentuk/aspx/Home ↗
- Appointment period ends
- 2 Sept 2022, 12:00 BST
- Submission channel
- {"electronicSubmission"}
- Accepted languages
- en
Timeline
14 Apr 2022 → 2 Sept 2022 · 3 dates- Next notice expected14 Apr 2022, 00:00 BST
- Notice published3 Aug 2022, 10:27 BST
- Admission / appointment period endsperiod end, not a bid countdown2 Sept 2022, 12:00 BST
Notice history
5 events · 3 releases on Find a Tender · since 3 Aug 2022- Published value published: £60,000,0003 Aug 2022, 08:19 BST
- Status changed to active3 Aug 2022, 08:19 BST
- Procurement method changed3 Aug 2022, 08:19 BST
- Deadline published: 19 Aug 2022, 12:00 BST3 Aug 2022, 08:19 BST
- Deadline moved to 2 Sept 2022, 12:00 BST3 Aug 2022, 10:27 BST+14 days · was 19 Aug 2022, 12:00 BST
Published amendments (1 · 1 deadline change)
| When | What | Before | After | Shift |
|---|---|---|---|---|
| — | DeadlineIV.2.2 | 19 Aug 2022 | 2 Sept 2022 | +14 d |
1 amendment published without a description.
Contracting authority & participating public bodies
Dispute resolution & review bodies
- High Court of England and Wales Royal Courts of JusticeReview body
Official documents & specifications (2)
Official links; attachments are not copiedTender pack and attachments
- Economic and financial selection criteria
- Technical selection criteria