PRO004613-Services-Framework-Lifting Equipment Statutory Servicing, Repair and Maintenance Services

The Scope of Work shall include the Statutory Servicing of Electric Hoists and Repair and Maintenance of any equipment used for lifting and lowering loads used on Company Water and Wastewater Treatment sites including, Bioresource, Energy Services and Network pumping stations throughout its Operational Area in line with LOLER and PUWER Regulations. For Electric Hoists, In order to verify that the hoists and accessories remain safe for use, and to detect and remedy any deterioration, thorough servicing is required throughout the lifetime of the equipment. For Repair and Maintenance, lifting equipment shall include, but not restricted to any equipment used for lifting and lowering loads, including any accessories used in doing so (such as attachments to support, fix or anchor the equipment). Examples include, powered and manual chain blocks, slings, electric hoists, runway beams, cranes, eyebolts, tripods, davit systems, erectable a-frames, lifting chains, chain slings, runway trolleys, powered and manual rope hoists, powered and manual travelling girder trolleys, gantry lifting clamps, portable tripods, shear legs, davit arms and gantries also the installation of fixed, slewing jibs, wall mounted, surface pedestal and socket davit arm lifting points. The lifting accessories shall include but not be restricted to single or multi leg and endless wire rope and textile slings, bow, 'D' and grab shackles, eyebolts with links, collared eyebolts and dynamo eyebolts, single and multi-leg chain slings. The Scope of Work shall also include the permanent marking of each piece of lifting equipment and accessory with a unique 6 figure number, it’s unique figure and safe working load shall be included on each test certificate were required.