Find a Tender
complete
Official procurement procedure
Emergency Standby Diesel Generators - Service, Inspect, Test and Maintenance Services
Repair and maintenance services
Published value
Not published
Submission deadline Not published
Lots published1
Procurement Executive Summary
AI & Search Synopsis
Generated from official OCDS record
Tenderline Synopsis: University Of Edinburgh: "Emergency Standby Diesel Generators - Service, Inspect, Test and Maintenance Services". Published status: complete. Published value: Value not published. 1 published lot. Submission deadline not published. See the official notice for participation instructions.
| Contracting Authority | University Of Edinburgh | Scope & Categories | Not published | Submission Window | complete No deadline published |
|---|---|---|---|---|---|
| Submission Gateway | Direct notice route | Legal Basis & Regime | Standard procurement | Estimated Value (exc. VAT) | Not published |
Bidder Intelligence · Authority Profile: University Of Edinburgh
Market Analytics
Derived from OCDS awards & bid statistics
Published history for University Of Edinburgh. These figures describe retained records, not a forecast of bids or a measure of buyer bias.
Published-to-award variance
Not availableInsufficient comparable data
Competition Density
3.3Bids / Report
Supplier ConcentrationNo estimate
Insufficient attributable awardsNo concentration estimate availablePayment Terms
Check noticePublished terms
Coverage: 230 active published awards; 205 bid reports (which may be per lot). Supplier values exclude multi-supplier awards, frameworks and DPS, and use GBP only. They are published award values, not payments. Published-to-award variance compares single-lot, single-award, single-supplier GBP procedures with explicitly non-framework/non-DPS status; increases remain in the average. Unpublished data stays unknown. Awarded suppliers are winners, not all bidders.
Procedure terms
Contracting AuthorityUniversity Of Edinburgh | Procedure methodNot published | Procurement categoryNot published |
Statuscomplete | Framework / DPSFramework | CompetitionNot published |
Above thresholdNot published | Legal basisNot published | Tender period startsNot published |
Clarification deadlineNot published | Electronic submissionNot published | Submission languagesNot published |
Published4 Jul 2024, 19:02 BST | Last source update4 Jul 2024, 19:02 BST | Recurring procurementNot published |
ClassificationRepair and maintenance services | ||
Delivery area | ||
OCIDocds-h6vhtk-03ed45 | ||
What is being bought
Framework agreement for a Comprehensive Emergency Standby Diesel Generator Maintenance Service which will service, inspect, test and maintain in a good and safe working order the emergency standby generator plant and associated equipment on the various systems throughout the University of Edinburgh estate.
There are approximately 50 standby diesel generators that support essential services across all University sites. The contract shall include emergency call out cover with a maximum 4-hour response time. The contract will require an engineer to attend at black starts per building per annum. Although the majority of work will be within 08.00 – 17.00 hours, the contractor must also attend to out of hours and weekend work when required. The service will include responsibility for updating an existing equipment schedule covering all emergency standby generator plant and associated equipment, including age and assessment of condition of equipment.
The framework agreement is being tendered on behalf of the University of Edinburgh and all University of Edinburgh Subsidiary Companies. Any and all of the University of Edinburgh’s Subsidiary Companies may access and utilise this Contract at any time during the relevant Contract period.
The Contractor shall undertake service, testing and maintenance tasks in line with the requirements of the SFG 20 schedules listed below and the manufacturer’s recommendations. As part of the major service a full load bank test shall be conducted.
43 – 01 Introductory Procedures – Power Generators
43 – 02 Power Generation: Standby Generators
43 - 03 Lead Acid Batteries – Unsealed
43 – 04 Battery Charging Equipment
56 – 05 Storage Tanks – Oil or 56 – 06 Underground Oil Storage Tanks, whichever is applicable.
40 – 10 Oil Pipework
Items to be included but not limited to for Services:
Record: kVA, Voltage, Amps, Phase(s), Frequency
Record Run Hours
Engine oil level
Fuel system. Exhaust system
Drive belts/bearings - visual inspection
Turbo oil feeds/drains
Coupling
Alternator bearings
Security of guards
General tighten of all nuts etc
Air through canopy/room
Radiator
Water hoses & clips
Water level/anti-freeze protection level
Battery electrolyte levels & S.G of cells
Battery charger/voltage
Generator output breaker
Control panel wiring & components
Indicator lamps/lamp test
Low oil pressure shutdown protection
Over speed protection
High engine temp protection
Other protection
Alternator connections
Running check for fuel/oil/water/exhaust leaks
Instruments/meters
Governor response
Engine heaters
General room conditions/tidy/warm
Battery type & Quantity
Change oil filter elements. Change engine Oil. Change fuel filters. Change air filters
Oil sample taken
Fuel Delivery system; check fuel level indicators/gauges, safety alarm systems and overfill prevention systems. Calibrate as necessary.
During the Contract Term, the Contractor shall provide a Reactive Works call-out service to the University. Reactive Works refers to repairs that are done when equipment has already broken down, in order to restore the equipment to its normal operating condition. The Contractor shall respond to Emergency call outs within a period of 4 hours. All parts and components shall be sourced from the plant or equipment original manufacturer. As instructed by the University, the Contractor shall support the Estate’s Electrical Engineer in the undertaking of a ‘Black Start’ exercise, through the provision of attendance of engineer(s) to assist and monitor the exercise. The Contractor shall be able to supply temporary generators of various output capacities for delivery and connection on site within a period of 24 hours of notification. If instructed by the University to replace any equipment, the Contractor shall ensure and provide verification to the University that the replacement equipment meets the exact or better specification of the Equipment being removed. The purchase of replacement Equipment shall remain optional to the University throughout the Contract Term.
What changed
From the official release history
- Status changed to complete
4 Jul 2024, 19:02 BST - Official notice release published
4 Jul 2024, 19:02 BST - Submission deadline changed to published date
4 Jul 2024, 19:02 BST - Status changed to active
23 Jan 2024, 16:54 GMT - Official notice release published
23 Jan 2024, 16:54 GMT - Submission deadline changed to 27 Feb 2024, 12:00 GMT
23 Jan 2024, 16:54 GMT - Status changed to planned
4 Aug 2023, 15:31 BST - Official notice release published
4 Aug 2023, 15:31 BST - Buyer information updated
4 Aug 2023, 15:31 BST
Lots and requirements (1)
Published by the contracting authority
- Lot 1 · #1Individual lot title not publishedcancelledPublished valueNot publishedThis Procurement will be conducted through the use of the Open Procedure. The Invitation to tender (ITT) will evaluate both the quality and cost elements and is weighted 80 percent Quality and 20 percent Cost. A Quality threshold will apply, bidders are required to achieve a score of 48 or more out of 80 to progress to award. This is a ranked framework agreement with the highest ranked supplier appointed to provide the comprehensive service in full. A second and third ranked supplier will make up a reserve list of two suppliers. Should the successfully appointed first ranked supplier subsequently become unable to perform their services in accordance with the expectations of the Framework, the University has the right to appoint the supplier, ranked 2nd during the original ITT evaluation to replace the supplier unable to perform services under this Framework Agreement. Should the 2nd ranked supplier be unable to provide the services under this Framework for any reason, the University will approach the 3rd ranked supplier. Bidders will be required to complete the following sections within PCS-T: ITT Qualification Section (Pass/Fail): Bidders will be required to complete the Single Procurement Document (Scotland) requesting general information concerning the bidder, exclusion criteria and selection criteria (including suitability, economic and financial standing, technical and professional ability, quality assurance schemes etc.). Bidders will be required to provide three examples of works and associated services that demonstrate the range of project types and contracts undertaken by your Practice and carried out during the past five years that demonstrate that they have the relevant experience in delivering services of a comparative nature and of a similar scale and complexity. The Services to be carried out under the Framework Agreement are described in the SFG 20 schedules. See Section II.1.4 of this contract notice and Schedule 3 of the ITT for full details of scope of supplies and services required. ITT Award l Section (80 percent Quality and 20 percent Cost) Bidders must confirm compliance with mandatory service requirements. Quality - Bidders will be required to answer weighted award criteria questions such as on Service Delivery, Approach to working with the University and Problem Solving, Quality Workmanship, Contract Management, The Team, Health & Safety and Fair Work and Sustainability practices. Technical Scores shall be allocated based on the total percentage achieved by the response out of the maximum possible percentage. This takes into account the score out of 4 and the weighting allocated to individual questions. Objective Scoring Criteria: 0 Unacceptable - Nil or inadequate response. Fails to demonstrate an ability to meet the requirement. 1 Poor - Response is partially relevant but generally poor. The response addresses some elements of the requirement but contains insufficient/limited detail or explanation to demonstrate how the requirement will be fulfilled. 2 Acceptable - Response is relevant and acceptable. The response addresses a broad understanding of the requirement but may lack details on how the requirement will be fulfilled in certain areas. 3 Good Response is relevant and good. The response is sufficiently detailed to demonstrate a good understanding and provides details on how the requirements will be fulfilled. 4 Excellent - Response is completely relevant and excellent overall. The response is comprehensive, unambiguous and demonstrates a thorough understanding of the requirement and provides details of how the requirement will be met in full. Cost – The bidder will be required to complete a Pricing Schedule. The bidder who submits the lowest cost will be awarded the maximum score and others awarded a score pro rata, in relation to the lowest bid. Additional information: he term of the Framework Agreement is 24 months with an option to extend a further 24 months in total. Economic operators may be excluded from this competition if there are in any of the situations referred to in regulation 58 of the Public Contracts (Scotland) Regulations 2015Contract periodNot publishedEligibilityNot publishedOptions / renewalNot published
Timeline
- Procedure published
4 Jul 2024, 19:02 BST - Award active
Not published · Not published - Contract active
Signed 12 Jun 2024, 00:00 BST · £438,502
Commercial outcome and competition
Awards Dieselec Thistle Generators, WB Power Services Not published · Not published · active |
Contracts Contract £438,502 · signed 12 Jun 2024, 00:00 BST · active |
Bid statistics bids: 5 (lot 1) electronicBids: 5 (lot 1) foreignBidsFromEU: 0 (lot 1) foreignBidsFromNonEU: 5 (lot 1) smeBids: 5 (lot 1) |
Buyer and organisations in this procedure
University Of Edinburgh
Contracting authority GB-FTS-2023Documents (0)
Official links; attachments are not copied
No linked documents are published
Related procedures (0)
No related procedures published